Kel-Tec PF9 Holster – Holster Options To Fit Your PF9

Kel-Tec PF9 holster

 

To be able to choose your Kel-Tec PF9 holster and that is suitable for your specific needs, we need to first be sure of the dimensions of the PF9 so that we know which options are available to us.

Weapon Size and Weight:

The Kel-Tec PF9 has the following measurements:

  • Length: 5.85 in (14.9 cm)
  • Barrel Length: 3.1 in (7.9 cm)
  • Width: 0.88 in (2.2 cm)
  • Height: 4.3 in (11 cm)
  • Weight: 12.7 oz (360 g)

From the above dimensions, you can see that the Kel-Tec PF9 can be classed as a small to medium sized pistol. This makes it more suited to concealed carry than some of the larger handguns out there. It also makes it suited for most types, but ideal if you want to go the routes of shoulder or inside the waistband (IWBs).

Looking At Five Kel-Tec PF9 HOLSTER OPTIONS

We listed ten of the top Kel-Tec PF9 holster options in the table above. Below we take a closer look at our five favorite picks.

DeSantis Kahr/Taurus/Keltec Sof-Tuck

Click on image to go to Amazon

First on our list is the Soft-Tuck from DeSantis. It is made from soft suede leather with the top being reinforced with saddle leather to help make reholstering easy and smooth. It is available in both right-hand and left-hand configurations.

Designed as a IWB/Tuck with a low print profile and tight body ride, it is ideal if you have concealed carry in mind. The soft suede leather will not irritate your skin or chafe your clothes like one made from harsher materials would. Of course the suede leather will absorb moisture a lot more, so if you tend to sweat a lot or be in wet conditions, the holster might not last very well. This also means keeping it clean will be more challenging, however if you wear it under your clothes most of the time it should not get too dirty anyway.

The adjustable cant makes carrying very comfortable as you can adjust the cant to your preferred position. The clip is nice and tight so that the holster will stay in place without flopping all over the place.

One thing that would worry us is the is the lack of a retention strap/mechanism to keep the gun in place so that it does not slip out. If you carry it IWB, then it should not be too much of a problem.

Overall this is a well-made product that comes in at a very affordable price. It is very comfortable to wear (especially for extended carry) and provides for good concealed carry. At the price that it retails for, it provides really good value for money.

Barsony Brown Leather Pancake

Click on image to go to Amazon

This pancake choice is made in the US by Barsony Holsters & Belts and comes in right-hand as well as left-hand options. Being made from quality leather and precision stitching, this option will last you a really long time if you look after it! Unlike most leather options, this option’s leather is so supple that you will not need to break it much in to get a good fit for your weapon. At approximately 4 ounces, it is pretty light…, especially for a leather pick.

It sits high and tight to the body, allowing for good concealed carry. With a loose shirt over your weapon, it will not likely get noticed by passers-by. You cannot adjust the cant though and is designed to be worn at a slight forward cant (some people like to refer to this as the “FBI style”. While this cant is not ideal for quick draws, it does make for a comfortable carry and good concealment. It also does not have a clip, so you cannot clip it to your pants for IWB carry. Rather, this is designed to be worn on the belt. Your weapon is kept securely in place by the buttoned clasp.

Federal Holsterworks Hip

Click on image to go to Amazon

If you are looking for a straightforward work-horse type, then this Nylon made from Federal Holsterworks could be the right Kel-Tec PF9 holster option for you. It is reasonably affordable and is made from sturdy Nylon, so you don’t have to feel bad if it gets dirty or a little worn.

It is designed to be pretty flexible in a number of ways. Firstly, you can adjust it to be either left-handed or right-handed. It can also be worn either on a belt or be clipped to the inside of your pants. For extra sturdiness during carry, it is recommended that you attach it to your belt and clip it to the inside of your pants. It has a thumb-break that keeps your weapon in place when holstered. The thumb-break is positioned across the hammer instead of the grip for a natural feel and a positive draw. An extra magazine pouch mounted on the front channel is standard.

We really like that it has multi-layer nylon cushion fit, which is designed to mould itself to the shape of the gun. It also means your weapon won’t get scuffed each time you contain your weapon.

If you want a top quality self-defense carry type that you can wear for extended periods, there are probably better Kel-Tec PF9 holster options out there that will suit your needs. However, if you want an inexpensive option that you can store your weapon in or take to the range, this is a really good option for you as it won’t break the bank and will get the job done.

OUTBAGS LOB3S-PF9 Black Genuine Leather IWB Conceal Carry Gun

Click on image to go to Amazon

Another leather option on our list of Kel-Tec PF9 holster options, this is handcrafted in the USA. The leather is cured and hardened to make sure the carrier keeps its shape. This makes it easy to reholster your weapon (as it won’t collapse in on itself). It also has a protective clear coating to keep your holster looking good and clean.

This is specifically designed to be IWB, so if you are looking to carry concealed, this is a good Kel-Tec PF9 holster for your needs. If you want a case for OWB carry, then this is not the one for you.

This is really nice with the quality for a good price (at the time of this article being written, it was selling for less than the DeSantis and Barsony leather options on our list). The only criticism we have is that its clip tends to be really stiff, which results in it being really difficult to get it loose from your pants when you want to take the carrier off. This can be a bit awkward if you are in public and need to quickly remove it for whatever reason. It can of course be remedied with a bit of DIY if you really want to.

It is available in left-hand and right-hand options.

DeSantis N38 The Nemesis Pocket

Click on image to go to Amazon

The PF9 is a gun that is popular with folks who want to carry concealed. A popular option for concealed carry is the pocket one.

If you want to go for a pocket choice, this one from Desantis is an option you should seriously consider. It is made from viscous Nylon, which means it will not slip around or out of your pocket. It is also ambidextrous, so it will work well whether you are left-handed or right-handed.

To help make it even less conspicuous, It is padded to make sure it does not give off a gun print when it is in your pocket.

OUR TOP Kel-Tec PF9 holster CHOICE

There are really some great Kel-Tec PF9 holster options available today. So which Kel-Tec PF9 holster would we choose if we were looking for one to fit a Kel-Tec PF9? Lets recap the top options available:

The DeSantis is made from quality materials and it provides for comfortable carry. Being made from suede will make it a bit more difficult to keep clean and will be prone to absorbing moisture. At a very affordable price, you will get a good one that will give you carrying pleasure that you can adjust to suite your carry preferences.

The Barsony is a bit more expensive than the DeSantis (but only a little), but is also made from quality leather that gives it a really nice look. Quality is excellent and if looked after, this one can last you a long time. It is not adjustable, so if you are not happy with a slightly forward cant this choice is perhaps not the right Kel-Tec PF9 holster option for you. However if you want good looking, affordable and quality option to carry on your belt then this is a great option!

The Federal Holsterworks is an affordable work-horse type. It has a standard pouch for an extra magazine and can be adjusted to be worn on the belt or clipped to the inside of the pants (we recommend doing both). If you want an inexpensive straight-forward option to take to the range or storing your weapon, this is the one for you.

The Outbags leather is another good quality leather made, but which is also the cheapest leather Kel-Tec PF9 holster option on our list. It is specifically designed for IWB carry only, so if you want something that can also be carried OWB or SOB, then this will not satisfy your needs. However if you are looking for an IWB specifically, we strongly recommend it.

The DeSantis pocket is a nice option to consider if you want a concealed carry option that is not too conspicuous. The viscous Nylon material helps to ensure that your gun will not move around in your pocket, while the padding ensures a reduced gun print in your pocket.

Which one would we choose?

 

If we had to fork over our hard earned money for a new product that would fit the Kel-Tec PF9, what would we choose? Well there are some great PF9 holster choices out there. If we had to choose one that looks good, wears comfortably and is well made we would go with the Barsony pancake holster.

Its leather is supple and will be easier to maintain than the suede leather DeSantis option. We also like the slight forward canting that if offers. However, if we were looking for an IWB specifically, the Outbags leather would win the race.