Ruger SP101 Holsters – We Look At 10 Awesome Holsters

What is a good holster for the Ruger SP101? We list 10 great holsters in the table below that you can consider when shopping for a new holster. We also go and take a closer look at 5 of the holsters below in order to pick our favorite.

Holster
Our Rating
Cost
4 stars$$
4 stars$$$
5 stars$$$
5 stars$$$
4 stars$$$$$
5 stars$$$$
5 stars$
5 stars$$$
5 stars$
4 stars$

*To see any of the holsters' product info (price, user ratings, etc.) on Amazon.com, just click on the image to go to the product page*​

RUGER SP101

As with all guns, you need to take into consideration your guns functionality, weight, and size when looking for suitable holsters. The SP101 itself has 6 models with slightly different dimensions.

Weapon Size and Weight

The Ruger SP101 has the following measurements, depending on model:

Model 5765

  • Barrel length: 4.20 in / 107 mm
  • Overall length: 9.12 in / 232 mm
  • Weight: 30.00 oz / 850 g

Model 5718

  • Barrel length: 2.25 in / 57 mm
  • Overall length: 7.20 in / 183 mm
  • Weight: 26.00 oz / 737 g

Model 5719

  • Barrel length: 3.06 in / 78 mm
  • Overall length: 8.00 in / 203 mm
  • Weight: 27.00 oz / 765 g

Model 5720

  • Barrel length: 2.25 in / 57 mm
  • Overall length: 7.20 in / 183 mm
  • Weight: 25.00 oz / 709 g

Model 5771

  • Barrel length: 4.20 in / 107 mm
  • Overall length: 9.12 in / 232 mm
  • Weight: 29.50 oz / 836 g

Model 5737

  • Barrel length: 2.25 in
  • Overall length: 7.20 in
  • Weight: 26.00 oz / 737 g

With these dimensions, all the SP101 models can be classed as medium to large guns and, as such, are difficult to use with pocket and ankle holsters. For the Ruger SP101 revolvers, the best holsters would be OWB (over the waistband) holsters, IWB (inside the waistband) holsters, and shoulder holsters.

Weapon Use

As the Ruger SP101 is designed to be used for self-defence, your best bet will be IWB and OWB holsters. OWB holsters are great if you have no need to conceal your weapon, but for most people, concealment is key.

A shoulder holster is ideal for concealing the Ruger SP101, but bear in mind that it requires you to wear a coat or jacket at all times for the weapon to be hidden. As well as not being ideal for warmer climates and seasons, wearing a jacket or coat will also slow down the quickness of your draw.

On the other hand, an IWB holster is ideal for comfortable, concealed carry without a jacket, whilst also allowing quick draw when necessary.

5 RUGER SP101 HOLSTER OPTIONS REVIEWED

We listed and compared 10 great holster options for you in the table above. But let's look at the top 5 options in a bit more detail. We want to look at overall quality, retention, comfort and affordability/value for money.

DESANTIS N38 The Nemesis Pocket Holster Ambidextrous

Click on image to go to Amazon

This is an ambidextrous Ruger SP101 holster option made of a type of viscous black cloth that actually makes your weapon stick to it as if it were fly paper. Desantis say that it would simply never move out of position from your front pocket.

The inside lining is made from a slick cloth, which means there is practically no friction when drawing your weapon. Also, the core has foam to break up the outline of the gun. Some users have mentioned, however, that this foam is not enough to conceal the gun well.

Other users have tried the holster with various pockets sizes, on various garments from jeans to cargo pants, and still felt the imprint of the gun was very noticeable. Another criticism is that the bottom of the holster is too wide and may not fit all front pockets. The wide holster ends up stretching the pocket, causing a more pronounced printing issue.

This Ruger SP101 holster could possibly be a good storage holster, but may not be ideal for actual wearing.

Fobus Standard Holster RH Paddle

Click on image to go to Amazon

The holsters from Fobus are made from space age high density plastics and injection moulding, which are designed for military and law-enforcement forces in mind.

The materials that this holster is made from results in a durable holster that is also low maintenance! If you want to clean it, you can just wipe it down with some water and a bit of soap. No need to break the holster in first like with leather holsters.

One think you will need to do when you first get the holster is to adjust the retention screw to adjust the retention to your liking. Often Fobus holsters come from the factory with the screw quite tight.

Comfort is a feature of this holster thanks to the paddle that it comes with. So if you need to carry for a long period of time, that will be a huge factor.

The holster rides nice and high, and is a good option for concealed carry. Thanks to the molding of the holster, fit and retention for the SP101 is excellent!

There has been some complaints about 2 hard plastic studs, which some folks say dig into your side. Some folks also mentioned that the springs on the metal reinforcing clip on the back of the paddle causes some discomfort when they bend over.

Outbags OB-09SC Nylon OWB Belt Gun Holster

Click on image to go to Amazon

This Ruger SP101 holster option is made from 600 Denier Nylon and is available for left and right handed users. It boasts a fully adjustable thumb break, which the makers say eliminates delay when drawing your gun, a removable steel belt clip so you can mount the holster onto a belt or waist band, a belt loop which allows you to secure the holster to a belt permanently, and a webbed spine which allows the holster to bend into your body and ensure a snug fit that's personalised to you.

Additionally, you also get a magazine pouch. Despite the fact that the makers sell left and right handed versions, some users have noted that it can be classed as ambidextrous; they simply remove the metal belt clip and switch to the nylon loop on the other side.

Also, the thumb straps can be swapped, removed completely or adjusted using the velcro under the nylon loop. The Ruger SP101 holster is also lined with a smooth cloth instead of just nylon. One user felt that this holster was very comfortable and he was able to wear it on his hip with a jacket covering it, but he felt it would be difficult to conceal in the summer without a jacket, and was not very comfortable to drive with.

One drawback of this Ruger SP101 holster option is that some users have found that it is a little too big for the SP101. One user felt that the holster was about 2 inches too long. He managed to get around this by placing a piece of foam at the bottom of the holster. However, some people may not find this idea appealing, especially as this holster does advertise itself as a holster for the SP101, amongst other guns.

BLACKHAWK! Leather Speed Classic Holster

Click on image to go to Amazon

This Ruger SP101 holster option is hand made from premium wet-molded leather and heavy-duty elastic, which results in a discreet design and secure, snug fit. It comes with a trailing belt loop which can help to pull the grip in closer to the body.

Blackhawk have styled this holster to look similar to the famous Berns-Martin design. This is a quality holster, but keep in in that a number of users have said that it is far too small for the SP101, with the weapon's 3 inch barrel being an inch too long for the holster.

Also, the belt loops will only fit a small one inch belt and nothing larger. Additionally, one user said that, because there was only one belt loop to one side, the holster would not sit well on his hip.

Bianchi 5BHL Thumbsnap Holster

Click on image to go to Amazon

Unlike a lot of Ruger SP101 holster options which are designed for more than one make of gun, this holster is designed for the SP101 only. It is made from thick, Mexican leather with hard boning, which provides a contoured, precise fit.

It also boasts an integral, steel-reinforced thumb snap closure which retains the gun securely, and a 1.75 inch belt slot which is double-stitched and molded to make it easier to get the holster on and off the belt. As with all good leather products, there is some time needed to break the leather in, but once this is achieved, drawing and re-holstering is very smooth.

Although this Ruger SP101 holster option rides high, it's not the ideal holster for concealed carry, unless you wear a thick, long jacket, but it was never designed for this anyway. A quality Ruger SP101 holster option.

OUR TOP RUGER SP101 HOLSTER CHOICE

There are really some great Ruger SP101 holster options available today. So which Ruger SP101 holster would we choose if we were looking for a holster to fit a Ruger SP101? Lets recap the top options available:

The Desantis 'Nemesis' holster is made from black cloth and, although fits the SP101 well, is not designed for quick draw. It is comfortable to wear, but there are serious issues regarding concealment, as well as problems with not fitting a lot of front pockets.

The Fobus Standard holster is made from plastic and injection moulding, is very durable, and fits the Sp101 very well. However, it seems it requires some work to be able to draw your weapon quickly and smoothly. There are also serious issues regarding comfort, as many users have mentioned that the springs on the reinforcement clip, and the plastic studs, cause pain when wearing the holster.

The Outbags holster is made from nylon that is very comfortable to wear, due to it's webbed spine, which gives a personalised fit. Draw seems to be quick and simple, but the main drawback here is that the holster is a little on the large side, and it may be too large for the smaller SP101 versions.

The Blackhawk Leather Speed Classic holster is a premium holster made from wet-molded leather and elastic. Draw is smooth and fast, once the leather has 'broken in', which is to expected for any leather holster. But there are issues due to the size being too small for some SP101 models. Also, comfort and security are issues, as this holster does not sit correctly on the hip for some users.

Bianchi Thumbsnap holster is made from Mexican leather and draw is quick, as long as the leather is 'broken in'. Fit is perfect, as this is the only holster here designed just for Ruger SP101, and it is extremely comfortable to wear. The only drawback we can see is that, unless a long jacket or coat is worn, it is not ideal for concealed carry.

Whic Ruger SP101 holster would we choose?

In terms of all the 4 aspects we look for in a Ruger SP101 holster option, namely quality of materials the holster is made from, comfort when wearing, fit of the Ruger SP101, and ease of draw, then, without doubt, the Bianchi Thumbsnap holster gets top marks.

With quality leather, a design that ensures a perfect fit for the SP101, unbeatable comfort, and a smooth draw, no other holster can beat it.

The only disadvantage we can find is that it is not designed for concealed carry. For concealment, the Outbags holster would be a good alternative, but make sure it fits your model of SP101, as it can be a little too big for some of them.

Are There Better Ruger SP101 HOLSTER OPTIONs?

Sometimes too many choices can be overwhelming. That is why we decided to look at only 5 holsters in detail for the Ruger SP101. If you know of any other holsters that would be excellent options for the SP101, please leave us a note in the comments section below to tell us about it.