Beretta 92FS Holsters – 5 Holsters To Fit Your Beretta 92FS


Leather5 stars$$$$$
Nylon5 stars$
Carbon-Fiber5 stars$$$
Leather5 stars$$$$$
Nylon4 stars$$
Nylon4 stars$
Leather4 stars$$$
Leather5 stars$$$$$
Trilaminate5 stars$$$
Leather5 stars$$$


The Beretta 92 is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The 92FS, within the range, is possibly the most trusted military and police pistol, with it being the main firearm for the US military and for allied forced around the world. In fact, the US military has recently renewed it’s contract with Beretta, so they obviously can vouch for it’s dependability, when used in some of the world’s toughest and extreme conditions.

The Beretta 92FS is a double and single-action semi-automatic pistol. It’s dependability is obvious when you consider the open-slide design, which enables flawless feeding and cycling of thousands of rounds, and the short-recoil delayed locking-block system, which gives pin-point accuracy and reliability. The Beretta 92FS consistently tops the US military requirement of a 10-shot group of 3” or less at 50 meters.

It also boasts a reversible magazine release, which means either right or left hand can be utilised for magazine changes, as well as an ambidextrous safety de-cocker. In keeping with the need for this gun to be used in the extreme conditions that the US military find themselves in, the Bruniton finish is corrosion and sweat resistant, and disassembly of the gun can be done without any tools for easy cleaning.


When purchasing a Beretta 92FS holster, the weight, functionality and size differs from one gun to the next. Keep the following in mind:

Weapon Size and Weight:

The Beretta 92FS has the following measurements:

Length: 8.5 in (217 mm)

Barrel Length: 4.9 in (125 mm)

Width:1.5 in (38 mm)

Height: 5.4 in (137 mm)

Weight: 33.3 oz (945 g)

From the above dimensions, you can see that the Beretta 92FS can be classed as a medium to large size gun. This makes it more difficult to conceal in general, and would be completely unsuitable for ankle or pocket holsters. Instead, when looking for a practical Beretta 92FS holster option you should look at shoulder holsters, over the waistband (OWB) holsters, and inside the waistband (IWB) holsters.

Weapon use:

The Beretta 92FS is designed to be used by the military and law enforcement agencies. However, they have also become extremely popular in the civilian market self-defence market too. For self-defence carry, you should choose between OWB holsters or IWB holsters. Most civilians who carry the Beretta 92FS would ideally like to be able to conceal their gun. In that case, an IWB holster is likely to be the better option. Shoulder holsters are a good option for concealed carry, if you live in colder climates where wearing a jacket all the time is common. But in warmer seasons or climates, concealing your weapon may become uncomfortable, and a jacket also will hamper the ease of draw and draw speed.


Below we look at 5 Beretta 92FS holster options that are available on Amazon. We look at the materials that the holsters are made from, the comfort of how it is worn, how it fits the Beretta 92FS, and how easy it is to draw your weapon from the holster.

Here are our top 5 Beretta 92FS Holster options:

Everyday Holsters Beretta 92/96 Hybrid Holster

 Click on image to go to Amazon

This is an IWB Beretta 92FS holster made from a hybrid of premium leather and Kydex, a thermoplastic. This holster is incredibly comfortable, which is rare for guns of this size. The holster keep the gun tight to your body and is therefore quite easy to conceal, again, normally quite difficult for guns of the size. The Kydex helps the holster to fit snugly into your side, and creates a customised fit over time. Another great feature is that you can adjust the ride height and cant, so you can determine the angle the gun is held at. This means you can make sure the gun is within easy reach. For the price, this Beretta 92FS holster seems to work as well as, if not better, than some higher priced holsters, and surpasses them for comfort, with one user saying that it was comfortable even in muggy and hot weather. The only small concern is that some of the leather edges may be a little sharp at first, which may cause some rubbing issues, but this is nothing that can’t be solved with some trimming.

Safariland Beretta ALS Concealment Paddle Holster

 Click on image to go to Amazon

This Beretta 92FS holster is made from suede and injection molded plastics. The paddle design means that it rides close to the body with a slightly forward cant. It’s main selling point is the ALS (automatic locking system) which locks the pistol into place when it is holstered, keeping it securely in place and eliminating worries about the gun falling out. Removing the gun is done by deactivating the lock with the thumb at the same time as gripping the gun. This results in a fast draw, no seconds are lost deactivating the lock as the lever is positioned in the natural place your thumb would come to rest when gripping your pistol. It comes with a belt loop that fits belts from 1.5 to 1.75 inches in width. The suede lining, additionally, protects the gun from scuffs and marks. A great fit for your pistol, this Beretta 92FS holster’s only real concern is that, with the paddle, it is not very concealable, as canting is only done from the belt and not on the paddle.

Outbags OB-19SC Nylon OWB Belt Gun Holster with Mag Pouch

 Click on image to go to Amazon

This inexpensive, OWB Beretta 92FS holster is made from 600 denier Nylon and comes with a magazine pouch. It features a fully adjustable thumb break which eliminates delay when drawing, a steel belt clip for clipping onto belts or waistband, and a belt loop for a permanent mount to the belt. The standard Outbags webbed spine feature is also evident here, creating a snug, personalised fit to the user. A very good fit for the Beretta 92FS, it holds the gun securely, but it comes free when you need to draw, with just a flick of the thumb. The main concerns for this holster is in it’s craftsmanship, which seems to be an issue with all Outbags holsters. The belt clip is stiff and is difficult to get onto the belt and off again. Also, the material holding the belt clip to the Beretta 92FS holster is easily worn away, and there are issues with seams unravelling. Most users tend to not bother with the belt clip, and use the belt loop.

BlackHawk CQC Carbon Fiber Holster

 Click on image to go to Amazon

This Beretta 92FS holster is made from carbon fiber and, as to be expected, is extremely study and durable. It features the patented SERPA Technology lock, which is featured in a number of Blackhawk holsters. This lock eliminates the need for a thumb break, which speeds up your draw. Essentially the lock engages the trigger guard as you holster your pistol and locks the gun into place. It will retain the gun until you release it. To release the gun from the lock, all you have to do is remove the gun as you would normally and, as this Beretta 92FS holster is designed so that your trigger finger naturally falls on the lock release mechnaism, you can unlock and draw at the same time. It comes with a belt loop and paddle platform, depending on preference. Also, the belt loops have swivel buckles which allow for greater flexibility. This all makes the Beretta 92FS holster very comfortable to use as it can be adapted to each users’ preferences. The only concern seems to be when sitting down. As the holster is made from durable carbon fiber, it is harder than most holsters, and may dig into the sides when sat down, causing pain. You will also need to tighten the screws from time to time to keep the holster snug enough for your gun.

Bianchi M12 Comercial Holster Hip Pistol

 Click on image to go to Amazon

Our most expensive Beretta 92FS holster on the list, this holster is the US military’s standard issue holster. It’s designed to handle any climate and any condition, which is to be expected when you realise the different environments that the armed forces have to operate in. Apart from exceptional durability, this holster has the ability to have extra add-on modular accessories, making it ideal for the military. This is ideal for anyone who likes going camping, hiking hunting etc. It also fits the Beretta 92FS perfectly, and protects the weapon from all elements. This Beretta 92FS holster, however, is not designed for drawing speed or for concealed carry, so it becomes difficult for civilian use, apart from when partaking in activities such as hunting, hiking etc.


There are really some great Beretta 92FS holster options available today. So which Beretta 92FS holster would we choose if we were looking for a holster to fit a Beretta 92FS? Lets recap the top options available:

Everyday Holsters Beretta holster is made from Kydex and premium leather. Comfort when wearing this holster is second to none, and it is the perfect fit for the 92FS. Drawing the gun from the holster is extremely smooth, and concealing the weapon is easy, despite the Beretta 92FS being a larger gun.

Safariland Beretta ALS Concealment Paddle Holster is made from injection molded plastics and suede, and, due to the automatic lock system feature, draw is fast and smooth. It is also a perfect fit for the Beretta 92FS, and is very comfortable to wear. The only concern is that, despite it’s name, it can be difficult to conceal, with the paddle being rather bulky.

The Outbags OB-19SC OWB Belt Gun Holster is made from 600 denier nylon, and is comfortable to wear with its webbed spine feature, which gives a customised fit to the user. It fits the Beretta 92FS very well, and draw is smooth with the fully adjustable thumb break. As with most inexpensive holsters, there are concerns regarding durability, with issues with seams unravelling and damage caused by the belt clip.

The BlackHawk CQC Holster is made from carbon fiber and is therefore very durable. The elimination of the thumb break because of the patented SERPA technology lock means lighting fast draw, whilst also fitting the Beretta 92FS perfectly. The main concern is that, due to it’s carbon fiber construction, this holster may be uncomfortable when sat down. You may need to consider when you would be carrying your weapon. If it’s mainly when standing up and walking, then this holster will cause no discomfort. But if you expect to sit down, this may well dig into your sides.

The Bianchi M12 Comercial Holster is, without doubt, the most durable and reliable of all the holsters. Incredibly well made, and able to withstand all the elements, this holster will stay faithfully by your side no matter what you are doing, and never cause you any discomfort. However, as to be expected, draw is not fast because of the protective flap, and it is simply not designed for concealed use. Bearing in mind that the military don’t need to conceal weapons, and their need to have a holster that will keep up with all the demanding environments that military personnel find themselves in, we can see why this design is so loved by the US Forces. But for civilian use, the problems with concealing the weapon, and the inability to draw your weapon fast and smoothly are major issues.

So which Beretta 92FS holster option would we choose?

Making it to first place in our Beretta 92FS holster options list, is the Everyday Holsters Beretta holster! We are amazed at how this holster can conceal such a large gun as the Beretta 92FS so well, and at the same time be so comfortable to wear. Although the Bianic M12 Comercial holster is the most expensive and most durable holster on the list, the fact that is not designed for general civilian use has meant that it could not be our number one Beretta 92FS holster. Unless you find yourself needing to have a gun with you in rough environments, the Everyday Holsters Beretta holster is durable enough for normal use, and also gives unbeatable concealment and a fast, smooth draw.


What do you think of the Beretta 92FS holster options we reviewed? Do you think there are better holsters for the Beretta 92FS out there that we did not list? If so, send us a message and tell us what holster you think is the ultimate Beretta 92FS holster!

We hope you find the best Beretta 92FS holster for your needs! If you have any thoughts on the topic, we would love to hear it. So please, share your thoughts with us in the comments section!

Disclaimer: does not manufacture, sell or distribute any of the holsters described above. All information is based on descriptions provided for the product by the relevant sellers’ product page for the holster on

No Responses

Leave a Reply

Your email address will not be published. Required fields are marked *